3 super-simple ideas for cleansing parquet


99


Parquet has always been the most widely used construction material due to its exceptional characteristics of solidity and resistance. In fact, thermal insulation, sound insulation, resistance to wear, hardness and elasticity are just some of the characteristics of a wooden floor that make it unique.

Parquet not only adds warmth, elegance and comfort to every room it is installed in, but it also has a long lifespan and can be completely renewed with a simple sanding.

If you choose to install parquet in your home, you should be aware of the permanent cleaning and maintenance that it will require. Because over time, the natural color of the parquet changes due to changes in the cell walls and the components that make up the cells themselves. Changes in cell wall staining are primarily caused by exposure to air, moisture, and light.

To prevent the parquet doesn’t deteriorate too quickly, it is necessary to carry out daily maintenance. Indeed, the parquet may warp, become dusty and deform. Therefore, it is essential to ask how to clean parquet of your house. Read on, we’ll tell you exactly how to maintain your parquet floor as efficiently as possible without damaging it.

The cleanliness of a wooden floor is essential for a number of reasons:

It cannot be overemphasized the unique character of parquet. Indeed, wood is a living substance that is constantly evolving. It ages, changes color and changes over time, just like humans. It also “suffers” from heat, cold and humidity. Since it demands more attention, we can’t just install it, use it every day, and leave it to its fate.

That’s why it’s essential to keep it as fresh and new as possible to ensure its longevity. After the initial investment, which is usually quite large, it would be a shame, both in terms of aesthetics and convenience, if it were not cleaned and treated properly. On the contrary, daily attention keeps it beautiful and healthy so that we can get the most out of it.

Oxidation is an inevitable development of any parquet floor, but certain solutions can be used to minimize the damage. The color of wood changes when it is in close contact with sources of light and heat, such as the sun. Indeed, instead of hardening, the parquet becomes lighter as a result of its exposure to the rays of the sun.

This difference is especially noticeable when we have carpets or heavy furniture, such as sofas. When we move them, we find that the parquet takes shape in a different color. There is no need to be alarmed, as this is a very common phenomenon. Just be aware of this and assume that the wood will undergo this natural transformation. Treatments to limit lightening will be covered in the following tips.

Tip #1: Be aware of caveats

You guessed it! various substances and mechanical pressures can damage and discolor your parquet.

Certain liquids, such as bleach or alcohol, should not be used on the parquet, as well as common cooking ingredients such as oil, milk and wine. In general, the use of foaming, abrasive, acidic or caustic chemicals, whether chemical or natural, should be avoided.

It is also important to keep water away from the floor in order to keep it in good condition. Halos and spots can occur if care is not taken quickly.

Because as you know, wood, a highly hygroscopic substance, swells due to the humidity retained by excessive use of water, which infiltrates through micro-cracks in the boards and creates changes. However, water should not be demonized as it is essential for proper cleansing when used correctly!

Tip #2: Good protection

In order to prolong its lifespan, the parquet receives a special treatment after being laid. Before installing this treatment, it is important to have a plan and know how to proceed.

Parquet protected with oil, wax or varnish, when placed in a humid environment of 40-65% and a constant ambient temperature between 16 and 22°, achieves excellent protection after 20-30 days. However, you should take extra precautions and wear flexible shoes throughout this period.

The pre-finished surface of the parquet should be protected by covering it with a breathable material of a flexible, non-sticky thickness in the event that additional construction work has to be carried out.

Tip #3: The right method for each type of protection

The methods of cleaning parquet differ slightly depending on the treatment chosen. Because as you know, the main purpose of protection is to minimize the damage caused by water, which obliges us to rethink how to clean each protection formattaking into account the specific characteristics of each.

When it comes to varnishing, the parquet will be a little more resistant to water and the cloth you choose to clean it should be a little wetter.

On the other hand, oiled parquet is more resistant to scratches but not as resistant to water as varnished parquet. That is why we must use a slightly damp cloth to clean it. If we discover a scratch during the cleaning process, we can immediately repair it by applying oil to the affected area.

On the other hand, if this happens with varnished parquet, we have no choice but to repaint the damaged part.

As there are products on the market intended exclusively for cleaning varnished or oiled parquet floors, it is possible to make an informed decision and avoid any potential damage.

Waxed parquet is another form of parquet that needs to be cleaned in a special way. Use very little water to avoid losing the wax layer, which can lead to color changes and especially halos. However, it is possible to restore the shine of the parquet by first wiping it with a slightly damp towel, then applying a new coat of wax when necessary.

A few tips :

There are a few general criteria that apply to all varieties of parquet in order to preserve the unique characteristics of the floor for as long as possible:

  • Make sure to always ventilate the areas where there is parquet.
  • Make sure that the parquet is not covered for a long time.
  • Always use a damp, well-wrung cloth to clean the floor instead of pouring water on it.
  • To avoid spreading dust and dirt from shoes on the hardwood floor, put on a doormat and use slippers whenever possible.
  • Chairs should always be supported by glides to avoid damaging the parquet.
  • Use mops or cleaning cloths specially designed for parquet, which do not scratch but effectively remove dust and residue from the surface.

If you liked the post let me know. It’s the only way for me to improve it.


Like it? Share with your friends!

99