4 selfmade suggestions for cleansing your rest room


It is important to clean the bathroom well, because these are the parts that must respect a certain hygiene. Bacteria and fungi accumulate there quickly and must be eliminated.

Here are some amazing tips to quickly clean your bathroom while using ingredients you have at home, you will no longer need to buy expensive chemicals.

These tips will help you clean the toilets, faucets, walls and curtains in your bathroom which are the most difficult places to wash, but by following these steps you can do it without a problem.

For the toilet

You will need:

  • 2 tablespoons of hydrogen peroxide
  • The juice of a lemon
  • A small bowl
  • Spoon
  • Gloves (optional)
  • A sponge

Use :

The first thing to do is to put the baking soda and hydrogen peroxide in the small bowl and mix until you have a uniform paste.

When you get this paste, you need to add the lemon juice (if you think it is necessary to add baking soda to make the paste thicker, you can do that).

When the mixture is ready, you need to place the dough on the edges of the inside of the toilet with your hand or with a spoon.

With the sponge, you need to rub the paste on the surface of the toilet, the edges, the cover and more.

After rubbing for a while, you can let the paste act for at least 20 minutes.

After this time, you need to remove it with the same sponge and plenty of water to achieve a whitening and disinfecting effect.

For taps

You will need:

  • 2 tablespoons of vinegar
  • 1 tablespoon of flour
  • A small bowl
  • A soft bristle brush
  • Spoon
  • A sponge

Use :

The first thing to do is to put the flour and vinegar in the small bowl and mix them well (if you get a paste, you can add more of either).

Then you will have to put the paste that you have in the joint of the taps and the sink with a spoon.

You should leave it on for at least 5 minutes.

Then you need to scrub with a brush to remove all the dirt.

And finally, rinse with plenty of water using a sponge.

Remember to dry afterwards to prevent marks or dust from sticking to the surface.

For tiled walls

You will need:

  • 1/2 cup white vinegar
  • A bottle or sprayer
  • A microfiber cloth for humidification
  • A dry microfiber cloth
  • Some water

Use :

The first thing to do is to wipe the surface of the walls with the dry microfiber cloth on the tiles you want to clean.

At the same time, you need to put the amount of water and vinegar in the sprayer.

Once everything is ready, you need to spray the walls with this liquid.

Once you have finished spraying the walls, you should wait about 10 minutes for this cleaning and disinfecting effect to occur.

Then you need to moisten the damp cloth with water and rub the walls with it to remove vinegar and water residue.

And finally, run the dry cloth over it to dry the surface and prevent water spots on the tiles.

For plastic curtains

You will need:

  • 3 tablespoons of baking soda
  • Hot water
  • A basin
  • A soft bristle brush

Use :

The first thing to do is to place your shower curtain in a basin and then add the baking soda and hot water (until the curtain is covered).

You should leave the mixture and the curtain in place for about 20 minutes.

After this wait, you need to scrub the entire curtain with a brush (especially the bottom, where bacteria, fungus and lime can collect).

Then rinse it off with plenty of water.

And finally, dry the curtain.

Like it? Share with your friends!