The unsuspected 100% pure trick to wash and fragrance your rest room


We all know how difficult it can be to keep the bathroom fresh, clean and smelling great despite continuous cleaning.

In the bathroom, bad odors and dirt accumulate easily.

But there is an all-natural ingredient that will make it easier for you: white vinegar.

This ingredient not only cleans and degreases surfaces thoroughly, but also eliminates unpleasant odors.

Today we are going to see together how to use white spirit vinegar to clean the whole bathroom and make it smell good!

NB We advise you to always follow the manufacturer’s instructions in order to avoid damaging the surfaces.

For cleaning ceramics:

If you want to deeply clean and perfume the ceramics in your bathroom, white spirit vinegar is the remedy for you!

Simply pour 200ml of vinegar into a spray bottle and spray it onto the ceramic surfaces to be cleaned.

Leave on for about 10 minutes, then rinse thoroughly.

Its deodorizing and anti-limescale effect will immediately make your ceramics cleaner, whiter and more fragrant!

To make your solution even more fragrant, you can add a few drops of your favorite essential oil.

We recommend choosing citrus scents for a fresher, more natural smell.

For cleaning faucets and shower heads:

Vinegar is also very effective for cleaning steel parts in the bathroom.

In this case, all you need to do is create a mixture of half water and the same amount of vinegar.

Pour it into a spray bottle and shake it vigorously to mix the ingredients well.

Spray on the affected surfaces, leave to act for about 10 minutes and rinse.

If you mainly want to clean the filters of shower heads and faucets, you can also use the bag remedy!

Take a bag like the ones you use for the refrigerator and add pure spirit vinegar.

Then attach the bag to the faucet or put it shower heads and let it work for about 10 minutes.

Remove the bag and your filters will be completely limescale free!

NB Remember to always mix vinegar with water and never use pure vinegar as it can corrode the steel surface.

The shower :

When we talk about the shower, we are referring to the whole shower enclosure, including the glass, the shower tray and the tiles.

So let’s see how to clean them in detail using only white alcohol vinegar.

The shower panes:

The shower panes are certainly the part most prone to limescale stains.

To clean them thoroughly and make them shine, you can use a mixture of 200 ml of white alcohol vinegar and about 400 ml of water.

Pour the mixture into a spray bottle and shake it vigorously before using it to mix the ingredients.

Rinse and use a soft cloth to dry thoroughly. We recommend using this cleanser after each use of the shower.

In this way, you can avoid the formation of limescale and fogging.

The shower :

The shower, although often neglected, is another important element because it is in constant contact with water.

In addition, it is here that we put our feet and it is therefore here that our body comes into direct contact with dirt and limescale.

Prepare a solution of half vinegar and half water and pour it into a spray bottle.

Then shake vigorously to mix the ingredients well and spray the mixture on the shower tray. Leave it on for a while, then use a soft sponge to remove the dirt.

Dry thoroughly.

Tiles :

Limestone forms not only on the windows and the shower tray but also on the tiles.

Add 3 tablespoons of vinegar to a bowl of warm water and add a teaspoon of washing up liquid organic.

Mix everything well and dip a soft, non-abrasive sponge into the bowl.

Then wipe the tiles with the sponge.

You will notice that the limestone disappears and your shower immediately smells better!

Bath cleaning:

The tub often tends to yellow and show stains and limescale deposits.

To clean it, just mix 2 tablespoons of white vinegar with a little lemon juice.

Spray the mixture obtained on the entire surface of the bathtub, leave to act for about 10 minutes, then wipe with a non-abrasive sponge.

Wipe the areas where the stains are then rinse.

The mixture of vinegar and lemon will not only have a brightening and cleaning effect on the bathtub, but it will also provide a pleasant natural fragrance.

For the toilets:

The toilet, the hardest part of the bathroom to keep clean and smelling good.

Toilets tend to stain easily and produce unpleasant odors.

First of all, therefore, the toilet bowl must be dried with a plunger and the excess water must be soaked up with a towel.

This way, the vinegar you use won’t be too diluted in the water and will therefore be more effective.

Then pour a liter of undiluted white vinegar directly into the toilet and be sure to also pour it on the walls.

We recommend that you fill the tank of vinegar so that it can cover the lime stains.

For hard to reach areas, use a cloth soaked in this product and apply it directly to the stains. Let sit for at least two hours.

Then scrub the bowl with a toilet brush, using more vinegar if necessary.

Then flush the toilet to rinse away stains and residue. You can also repeat the process several times until the toilet bowl is sparkling clean.

There you go: all you need is alcohol vinegar to perfume and thoroughly clean your entire bathroom!


Always follow the manufacturer’s instructions before trying any of the remedies above to avoid damaging surfaces.

Do not use vinegar on marble or natural stone surfaces.

Like it? Share with your friends!